The DIY ZigBee RGBW Light Strip Kit is a complete solution based on the Zigbee 3.0 protocol, including a power adapter, RGBW LED controller, and RGBW strip, with plug-and-play setup and country-specific adapters available. It enables flexible installation without wiring, allowing users to shape lighting freely, while the W channel can be controlled separately via compatible Zigbee remotes or through a gateway’s color temperature interface. This Zigbee end device supports Touchlink commissioning, find and bind mode, self-forming networks without a coordinator, and can bind with up to 20 Zigbee green power remotes. It is compatible with universal Zigbee gateways and enables control of ON/OFF, brightness, and RGB color.
| Eingangsspannung | 100-240VAC, 50/60Hz | Eingangsspannung | 12/24 V Gleichstrom |
|---|---|---|---|
| Ausgangsspannung | 24 VDC | Ausgang Strom | 4 Kanäle, 1,5 A/Kanal |
| Ausgang Strom | 1,5 A | Ausgangsleistung | 72 W bei 12 V, 144 W bei 24 V |
| Ausgangsleistung | 36 W | Ausgangstyp | Konstante Spannung |
| Ausgangstyp | Konstante Spannung | Abmessungen (LxBxH) | 84 × 20 × 14 mm |
