The KNX DALI Gateway is a DIN rail module for installation in the distribution board on a 35 mm mounting rail. It is a DALI single-master controller to DALI standard IEC 62386 Parts 101ed2 and 103ed1. The gateway is suitable for use with DALI and DALI-2 systems. It supports Device Type 6, Device Type 8 Tc, Device Type 8 XY coordinate, Device Type 8 RGB with DALI interfaces to IEC 62386 and their integration in a KNX building installation. The DALI gateway has 2 channels DALI output. Up to 64 DALI devices can be connected to each DALI output. DT6 and DT8 devices can all be connected to each DALI output in a mixed configuration.
| Supply | Gateway supply voltage | 100-240VAC, 50/60Hz |
|---|---|---|
| Supply | Total current draw from mains | Maximum 48mA |
| Supply | Total power consumption via mains | Maximum 11W |
| Supply | KNX Bus voltage | 21-30V DC, via the KNX/EIB bus |
| Supply | KNX current consumption | Maximum 10mA |
| Supply | Power consumption via KNX | Maximum 210mW |
| DALI outputs | Number of outputs | 2 |
| DALI outputs | Number of DALI devices | Maximum 64 per output |
| DALI outputs | Supported device types | DT6. DT8 Tc, DT8 XY coordinate, DT8 RGB |
| DALI outputs | DALI voltage | Typical 16VDO |
| DALI outputs | Maximum supply current | 2x250mA |
| Connections | KNX | KNX connection terminal, 0.8 mm . solic |
| Connections | DALI outputs & mains voltage | Screw terminal, 0.5-2.5 mm ,stranded |
| Connections | Mini USB | USB-A to Mini USB data cable (USB 2.0) |
| Operation an display | KNX Button and red LED | For assigning the physical address |
| Operation an display | KNX Green LED flashing | Indicate the application layer running normally |
| Operation an display | DALI red LED on | Indicate DALI fault |
| Operation an display | DALI green LED on | Indicate DALI bus running normally |
| Type of protection | IP 20, EN 60 529 | |
| Temperature | Operation | -5°C.+45℃ |
| Temperature | Storage | -25℃…+55℃ |
| Temperature | Transport | 25℃..+70℃ |
| Ambient | Humidity | <93%, except dewing |
| Design | Dimensions | 90.1x72x66.4mm |
| Mounting | On 35mm mounting rai | To EN60715 |