The Zigbee Heating Thermostat is a wireless HVAC controller for heating systems that complies with the Zigbee 3.0 protocol and supports OFF, HEAT, ENERGY HEAT, AWAY, and DRY modes, with control available locally or remotely via a Zigbee gateway. It operates through IEEE 802.15.4-based platforms and other Zigbee 3.0 compatible systems, allowing adjustment of modes, control types, and schedules. Equipped with an air temperature sensor, it offers a measurement range of –10°C to +60°C with an accuracy of ±0.1°C, and requires electrical power to be switched off during installation.
| Radio Frequency | 2.4GHz |
|---|---|
| Input Voltage | EU: AC200-240V, 50/60Hz |
| Output Voltage | EU: AC200-240V |
| Max Load | 3680W @ 230V (resistive load) |
| Max Current | 16A |
| Power Consumption | <2W |
| Ambient Temperature | 0℃ to 40℃ (during operation) |
| Set Temperature Range | 0℃ to 40℃ |
| Hysteresis | 0.5℃ to 2℃ (default 0.5℃) |
| Floor sensor type | 1. NTC/10K B(25/50℃)=3950 (default) 2. NTC/15K B(25/50℃)=3950 3. NTC/50K B(25/50℃)=3950 4. NTC/100K B(25/50℃)=3950 5. NTC/12K B(25/50℃)=3950 |
| Control Mode | AWAY, AUTO, MANUAL, DRYING, OFF |
| Control Type | Control type means which temperature sensor the device refers to when it adjust temperature. adjust temperature refers to room temperature Room sensor: (factory default type). adjust temperature refers to floor temperature. Floor sensor: adjust temperature refers to both room Room+Floor sensor: temperature and floor temperature |
| Wiring Requirement | Current 13A – 1.5mm² wire ≤ Current > 13A to 16A – 2.5mm² wire |
| IP Rating | IP21 |
| Control Pollution Degree (Method D) | pollution degree 2 |
| Rated Impulse Voltage (Method D) | 4kV |
| Relative Humidity | 8% to 80% |
| Dimensions | 80x80x52mm |
| Approvals | CE, EN 60730-1:2016;A1, EN IEC 60730-2-9:2019;A1 LVD: EN IEC 61000-3-2:2019, EN 61000-3-3:2013+A1:2019, EMC & RF: EN 60730-1:2016+A1:2019, EN 60730-2- 19:2019+A1:2019+A2:2020, EN 50663:2017;ETSI EN 301 489- 1V2.2.3, ETSI EN301 489-3V2.1.1 ETSI EN300 220-1 v3.1.1., ETSI EN300 220-2 V3.2.1 2014/53/EU RED certificate: |