SRP-2108-75CCF is an ENEC approved DMX 75w dimmable constant current LED driver with 4 channels 250mA-1500mA output that can be adjustable by DIP switches and 200-240VAC input. Power factor of the driver can be over 0.9 and efficiency is higher than 87%.
It enables smooth and deep dimming to 0.1% without flickering and buzzing noise. DMX channel quantity can be set as 1/2/3/4 via buttons, which enables the driver to control single color, tunable white, RGB/RGBW LED lighting.
DMX addresses can be manually assigned via buttons and showed on digital display. Complying with DMX512(2008), DMX512-A, this DMX driver is compatible with universal DMX master controllers.
ENEC certification ensures high safety performance of the driver to be used worldwide.
| Output | LED Channel | 4 | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Output | Selectable Current | 300mA | 350mA | 400mA | 450mA | 500mA | 600mA | 700mA | 800mA |
| Output | DC Voltage Range | 8-43V | 8-43V | 8-43V | 8-43V | 8-43V | 8-43V | 8-43V | 8-43V |
| Output | Selectable Current | 900mA | 1000mA | 1100mA | 1200mA | 1300mA | 1400mA | 1500mA | |
| Output | DC Voltage Range | 8-43V | 8-43V | 8-43V | 8-43V | 8-43V | 8-43V | 8-43V | |
| Output | Current Tolerance | ±3% | |||||||
| Output | Rated Power | ≤ Max. 64W/CH, CH1+CH2+CH3+CH4 75W | |||||||
| Input | Voltage Range | 200-240V AC | |||||||
| Input | Frequency Range | 50/60Hz | |||||||
| Input | Power Factor (Typ.) | > 0.9 @ 230VAC | |||||||
| Input | Total Harmonic Distortion | ≤ THD 15% (@ full load / 230VAC) | |||||||
| Input | Efficiency (Typ.) | 87% @ 230VAC full load | |||||||
| Input | Inrush Current (Typ.) | COLD START Max. 2A @ 230VAC | |||||||
| Input | AC Current (Typ.) | 400mA @ 230VAC | |||||||
| Control | Dimming Interface | DMX/RDM | |||||||
| Control | Dimming Range | 0.1%-100% | |||||||
| Control | Dimming Method | Pulse Width Modulation | |||||||
| Control | Dimming Curve | Logarithmic, Linear | |||||||
| Protection | Short Circuit | Yes, recovers automatically after fault condition is removed | |||||||
| Protection | Over Voltage | Yes, recovers automatically after fault condition is removed | |||||||
| Protection | Over Temperature | Yes, recovers automatically after fault condition is removed | |||||||
| Environment | Working Temp | -25℃ ~ +45℃ | |||||||
| Environment | Max. Case Temp | 80℃(Ta=”45℃”) | |||||||
| Environment | Working Humidity | 10% ~ 95% RH non-condensing | |||||||
| Environment | Storage Temp. & Humidity | -40℃ ~ +80℃，10%~95% RH | |||||||
| Safety & EMC | Safety Standards | ENEC EN61347-1, EN61347-2-13 approved | |||||||
| Safety & EMC | Withstand Voltage | I/P-O/P: 3.75KVAC | |||||||
| Safety & EMC | Isolation Resistance | I/P-O/P: 100M Ohms / 500VDC / 25℃ / 70% RH | |||||||
| Safety & EMC | EMC Emission | EN55015, EN61000-3-2, EN61000-3-3 | |||||||
| Safety & EMC | EMC Immunity | EN61547, EN61000-4-2,3,4,5,6,8,11, surge immunity Line-Line 1KV | |||||||
| Others | MTBF | 190200H, MIL-HDBK-217F @ 230VAC at full load and 25℃ ambient temperature | |||||||
| Others | Dimension | 244*64*32mm (L*W*H) |