The 30W RF LED Driver (Constant Current) is a Class 2 power supply with a fully isolated plastic case, featuring hybrid comfy dimming for smooth, deep, and flicker-free dimming down to 0.1%, delivering a single-channel constant current output with a maximum power of 30W and selectable output current from 250mA to 1000mA via dip switches; it supports ON/OFF and dimming control of single-color LED lighting, operates with RF remotes at 869.5/916.5MHz, and maintains a low standby power consumption of less than 0.5W.
| Output | Selectable Current | 250mA | 300mA | 350mA | 400mA | 450mA | 500mA | 550mA | 600mA |
|---|---|---|---|---|---|---|---|---|---|
| Output | DC Voltage Range | 8-55V | 8-55V | 8-55V | 8-55V | 8-55V | 8-55V | 8-54V | 8-50V |
| Output | Selectable Current | 650mA | 700mA | 750mA | 800mA | 850mA | 900mA | 950mA | 1000mA |
| Output | DC Voltage Range | 8-46V | 8-42V | 8-40V | 8-37V | 8-35V | 8-33V | 8-31V | 8-30V |
| Output | Rated Power | 30W max | |||||||
| Input | Voltage Range | 200-240V AC | |||||||
| Input | Frequency Range | 50/60Hz | |||||||
| Input | Power Factor (Typ.) | > 0.9 @ 230VAC | |||||||
| Input | Total Harmonic Distortion | ≤ THD 12% (@ full load / 230VAC) | |||||||
| Input | Efficiency (Typ.) | 83% @ 230VAC full load | |||||||
| Input | AC Current (Typ.) | 0.17A @ 230VAC | |||||||
| Input | Inrush Current (Typ.) | 0.17A @ 230VAC COLD START 9.76A max. at 230VAC | |||||||
| Input | Leakage Current | < 0.5mA /230VAC | |||||||
| Control | Dimming Interface | RF (869.5/916.5mhz ) | |||||||
| Control | Dimming Range | 0.1%-100% | |||||||
| Control | Dimming Method | Hybrid Comfy Dimming | |||||||
| Control | Dimming Curve | Logarithmic/ Linear | |||||||
| Environment | Working Temp | -20℃ ~ +45℃ | |||||||
| Environment | Max. Case Temp | 85℃(Ta=”45℃”) | |||||||
| Environment | Working Humidity | 10% ~ 95% RH non-condensing | |||||||
| Environment | Storage Temp. & Humidity | -40℃ ~ +80℃，10%~95% RH | |||||||
| Protection | Short Circuit | Yes, auto recovery after fault removed | |||||||
| Protection | Over Voltage | Yes, auto recovery after fault removed | |||||||
| Protection | Over Temperature | Yes, auto recovery after fault removed | |||||||
| Safety & EMC | Safety Standards | ENEC EN61347-1, EN61347-2-13 approved | |||||||
| Safety & EMC | Withstand Voltage | I/P-O/P: 3.75KVAC | |||||||
| Safety & EMC | EMC Emission | EN55015, EN61000-3-2, EN61000-3-3 | |||||||
| Safety & EMC | EMC Immunity | EN61547, EN61000-4-2,3,4,5,6,8,11, surge immunity Line-Line 1KV | |||||||
| Others | MTBF | 189400H, MIL-HDBK-217F @ 230VAC at full load and 25℃ ambient temperature | |||||||
| Others | Dimension | 170*53.4*28mm (L*W*H) |